MINISTER

100 tons

Press #24

Air clutch variable speed with 4.0" stroke, Minister straight side P2-100-48 presses, designed to run fully automatic

Equipped with:

a) P.A. Servo Feed

b) Coe 1600# capacity reel

c) Nitrogen cylinder tanks

d) Unist stock oilers

e) Wintress die protection

f) Wintress programmable limit switched

Shut Height: 16.0"

Slide Adjustment: 4.0"

Bed Area: 48.0" x 31.0"

Press Speed: 60-200 spm

BROWN BOGGS

100 tons

Press #22

Hi Pro 100, straight side, air clutch, variable speed press with 4" stroke designed to run fully automatic

Equipped with:

a) PA Ind. Servomatic Servo feed

b) Pallet decoiler with 5,000# capacity

c) Weldotron P.L.S. with 16 limit switch circuits and 2 die protection circuits

d) Imco Tonnage monitor

e) LSP Ind. stock oiler

Shut Height: 15.0"

Ram Adjustment: 4.0"

Bed: 60.0" x 31.0"

Ram: 60.0" x 18.5"

Press Speed: 50-150 spm

T-slots in Ram and Bolster plate: 6" centers

WALSH PRESS

90 tons

Press #2

Air clutch, variable speed obi with 6.0" stroke designed to run fully automatic

Equipped with:

a) Clarktron Rimfire 3 press and die protection

b) Rapid air feed with 8.0" feed length

c) LSP Ind. pneumatic stock lubricating system

d) Coilmate Pallet decoiler, 2,500# capacity

Shut Height: 12.0"

Ram Adjustment: 3.0"

Bed Area: 47.0" x 27.0"

Press Speed: 25-78 spm

Ram Flange Hole Configuration: Exhibit "D" on attached chart

WALSH PRESS

90 tons

Press #12

Air clutch, variable speed obi with 6.0" stroke

Equipped with:

a) Rapid air feed with 8.0" feed length

b) Air cushion for draw work

c) Stamping specialty lubricating system

d) 1000# capacity stock reel

Shut Height: 14.0"

Ram Adjustment: 3.0"

Bed Area: 43.0" x 27.0"

Press Speed: 25-75 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

90 tons

Press #1

Air clutch, variable speed obi with 6.0" stroke designed to run fully automatic

Equipped with:

a) Clarktron Rimfire 3 press and die protection

b) Rapid air feed with 8.0" stroke

c) Stamping specialty lubricating system

d) Little 1000# capacity automatic stock reel

e) Air cushion for draw work

Shut Height: 14.0"

Ram Adjustment: 3.0"

Bed Area: 43.0" x 27.0"

Press Speed: 25-75 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

65 tons

Press #14

Air clutch, variable speed obi with 4.0" stroke designed to run fully automatic, and has air cushion for draw work

Equipped with:

a) Clarktron Rimfire 3 press and die protection

b) Rapid air feed with 8" feed length

c) Stamping specialty lubricating system

d) Little 1000# capacity automatic stock reel

Shut Height: 11.5"

Ram Adjustment: 3.0"

Bed Area: 37.0" x 18.5"

Press Speed: 50-100 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

65 tons

Press #11

Air clutch, variable speed obi with 3.5" stroke, press used primarily for secondary

Equipped with:

a) Clarktron Rimfire 3 press and die protection

b) Rapid air feed with 8.0" feed length

c) Stamping specialty lubricating system

d) Little 1000# capacity automatic stock reel

e) Air cushion for draw work

Shut Height: 11.5"

Ram Adjustment: 3.0"

Bed Area: 37.0" x 18.5"

Press Speed: 50-100 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

65 tons

Press #3

Air clutch, back geared, variable speed obi with 5.0" stroke, press used primarily for secondary and equipped with air cushion

Equipped with:

a) Press is inlined for easy part expulsion

Shut Height: 14.0"

Ram Adjustment: 3.0"

Bed Area: 37.0" x 18.5"

Press Speed: For secondary work only

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

65 tons

Press #13

Air clutch, variable speed obi with 4.0" stroke designed to run fully automatic

Equipped with:

a) Clarktron Rimfire 3 press and die protection

b) Rapid air feed with 8.0" feed length

c) Stamping specialty lubricating system

d) Little 1000# capacity automatic stock reel

Shut Height: 11.5"

Ram Adjustment: 3.0"

Bed Area: 37.0" x 18.5"

Press Speed: 50-100 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

45 tons

Press #21

Air clutch, variable speed obi with 3.0" stroke designed to run fully automatic and secondary

Equipped with:

a) Clarktron Rimfire 3 press and die protection

b) Rapid air feed with 6.0" feed length

c) Stamping specialty lubricating system

d) Little 1000# capacity automatic stock reel

Shut Height: 10.0"

Ram Adjustment: 2.5"

Bed Area: 27.0" x 14.0"

Press Speed: 90-180 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS

38 tons

Press #4

Mechanical clutch obi with 3.0" stroke equipped to run secondary and hand fed operations

Shut Height: 10.0"

Ram Adjustment: 2.5"

Bed Area: 32.0" x 14.0"

Press Speed: 75 spm

Ram Flange Hole Configuration: Exhibit "A" on attached chart

WALSH PRESS

38 tons

Press #7

Air clutch, variable speed obi with 3.0" stroke equipped to run secondary and semi-automatic operations

Equipped with:

a) Rapid air feed with 3.0" and 6.0" feed length

b) Clarktron Rimfire 3 press and die protection

c) Stamping specialty lubricating system

d) PA 1000# capacity stock reel

Shut Height: 10.0"

Ram Adjustment: 2.5"

Bed Area: 27.0" x 14.0"

Press Speed: 90-180 spm

Ram Flange Hole Configuration: Exhibit "B" on attached chart

BLISS PRESS

35 tons

Press #5

Mechanical clutch obi with 3.0" stroke equipped to run secondary and semi-automatic operations

Equipped with:

a) PA ind. air feed with 6.0" feed length

b) Stamping specialties lubricating system

c) Little 600# capacity reel

Shut Height: 10.0"

Ram Adjustment: 3.0"

Bed Area: 25.0" x 14.0"

Press Speed: 78 spm

Ram Flange Hole Configuration: Exhibit "A" on attached chart

WALSH PRESS

28 tons

Press #6

Air clutch, back geared, variable speed obi with 2.0" stroke designed for secondary and hand fed operations

Shut Height: 8.0"

Ram Adjustment: 2.0"

Bed Area: 12.0" x 22.0"

Press Speed: 80-150 spm

Ram Flange Hole Configuration: Exhibit "A" on attached chart

BROWN BOGGS

20 tons

Press #15

Air clutch obi with 2.5" stroke designed for secondary operations

Shut Height: 7.5"

Ram Adjustment: 4.0"

Bed Area: 20.0" x 11.0"

Press Speed: For single operation only

Ram Flange Hole Configuration: Exhibit "A" on attached chart

WALSH PRESS

18 tons

Press #10

Mechanical clutch obi with 2.0" stroke, press equipped to run secondary and semi-automatic operations

Equipped with:

a) Rapid air feed with 1.5" feed length

Shut Height: 6.5"

Ram Adjustment: 2.0"

Bed Area: 19.0" x 9.0"

Press Speed: For secondary operations only

Ram Flange Hole Configuration: Shank only

LOSHBURGH JORDAN

18 tons

Press #9

Mechanical clutch obi with 1.5" stroke, press equipped to run secondary and hand fed operations

Shut Height: 6.75"

Ram Adjustment: 4.0"

Bed Area: 18.0" x 10.0"

Press Speed: For secondary operations only

Ram Flange Hole Configuration: Shank only

DIAMOND MFG.

12 tons

Press #8

Mechanical clutch obi with 1.5" stroke, press equipped to run secondary and semi-automatic operations

Equipped with:

a) Rapid air feed with 1.5" feed length

Shut Height: 6.0"

Ram Adjustment: 4.0"

Bed Area: 17.0" x 10.0"

Press Speed: For secondary operations only

Ram Flange Hole Configuration: Shank only

EQUIPMENT

AIDA
275 tons
Press #26  Model NC1-2500(D) Single Point Gap Frame
ServoPro press.
Adjustable stroke length 11.81" to .79"
Speed Ranger 30spm to 126spm

Equipped with:
a) Die Setter quick die change mechanism.
b) Servo series Integrated Press control.
c) Interface for complete automation and link with 3 other servopro presses
d) Aida model NCY-25-1 die cushion.

Shut Height: 21.26"
Slide adjustment: 4.72#
Bed: 68.9" x 35.4"
Ram: 43.3" x 28.7"
T-slots in Ram and Bolster plate: 6.0" centers  

AIDA
275 tons
Press #27   Model NC1-2500(D) Single Point Gap Frame
ServoPro press.
Adjustable stroke length 11.81" to .79"
Speed Ranger 30spm to 126spm

Equipped with:
a) Die Setter quick die change mechanism.
b) Servo series Integrated Press control.
c) Interface for complete automation and link with 3 other servopro presses
d) Aida model NCY-25-1 die cushion.

Shut Height: 21.26"
Slide adjustment: 4.72#
Bed: 68.9" x 35.4"
Ram: 43.3" x 28.7"
T-slots in Ram and Bolster plate: 6.0" centers

AIDA
275 tons
Press #28  Model NC1-2500(D) Single Point Gap Frame
ServoPro press.
Adjustable stroke length 11.81" to .79"
Speed Ranger 30spm to 126spm

Equipped with:
a) Die Setter quick die change mechanism.
b) Servo series Integrated Press control.
c) Interface for complete automation and link with 3 other servopro presses
d) Aida model NCY-25-1 die cushion.

Shut Height: 21.26"
Slide adjustment: 4.72#
Bed: 68.9" x 35.4"
Ram: 43.3" x 28.7"
T-slots in Ram and Bolster plate: 6.0" centers

AIDA
275 tons
Press #29  Model NC1-2500(D) Single Point Gap Frame
ServoPro press.
Adjustable stroke length 11.81" to .79"
Speed Ranger 30spm to 126spm

Equipped with:
a) Die Setter quick die change mechanism.
b) Servo series Integrated Press control.
c) Interface for complete automation and link with 3 other servopro presses
d) Aida model NCY-25-1 die cushion.

Shut Height: 21.26"
Slide adjustment: 4.72#
Bed: 68.9" x 35.4"
Ram: 43.3" x 28.7"
T-slots in Ram and Bolster plate: 6.0" centers

BROWN BOGGS
150 tons
Press #20  SS1 back geared, straight side, variable speed 50-125 spm.
5.0" stroke design to run fully automatic

Equipped with:
a) PA IND. Servomatic Servo Feed
b) PA Ind. Stock Straighter
c) Cooper-Weymouth 1,600# capacity double end stock reel
d) Weldotron Program designed limit switch w/16 limit switch circuits and 12 die protection circuits
e) LSP stock oiler
f) Passline height 8.0"-11.0"

Shut Height: 16.0"
Ram Adjustment: 8.0"
Bed: 60.0" x 42.0"
Ram: 60.0" x 42.0"
Press Speed: 50-125 spm
T-slots in Ram and Bolster plate: 6.0" centers

BROWN BOGGS
150 tons
Press #17  SS2 back geared, straight side, variable speed 50-125 spm.
5.0" stroke designed to run fully automatic

Equipped with:
a) PA Ind. Servomatic Servo feed
b) PA Ind. Stock Straighter
c) Cooper-Weymouth 1,600# capacity double end stock reel
d) Weldotron Program designed limit switch w/16 limit switch circuits and 12 die protection circuits
e) LSP stock oiler

Shut Height: 16.0"
Ram Adjustment: 8.0"
Bed: 60.0" x 42.0"
Ram: 60.0" x 42.0"
Press Speed: 50-125 spm
T-slots in Ram and Bolster plate: 6.0" centers

BROWN BOGGS
150 tons
Press #25  SS2 back geared, straight side, variable speed 50-125 spm.
10.0" stroke designed to run fully automatic

Equipped with:
a) PA Ind. Servomatic Servo feed
b) PA Ind. Stock Straighter
c) Cooper-Weymouth 1,600# capacity double end stock reel
d) Weldotron Program designed limit switch w/16 limit switch circuits and 12 die protection circuits
e) LSP stock oiler

Shut Height: 16.0"
Ram Adjustment: 8.0"
Bed: 60.0" x 42.0"
Ram: 60.0" x 42.0"
Press Speed: 50-125 spm
T-slots in Ram and Bolster plate: 6.0" centers

BROWN BOGGS
100 tons
Press #16  Hi Pro, straight side, air clutch, variable speed automatic press with 3.5" stroke designed to run fully automatic

Equipped with:
a) PA Ind. Servomatic Servo feed
b) PA Ind. Stock Straighter
c) PA Ind. stock reels, 1200# capacity (dual reels)
d) Clarktron Rim fire 3 press and die protection
e) LSP industries pneumatic stock lubricating system

Shut Height: 15.0"
Ram Adjustment: 4.0"
Bed: 60.0" x 31.0"
Ram: 48.0" x 18.5"
Press Speed: 80-200 spm
T-slots in Ram and Bolster plate: 6" centers

BROWN BOGGS
100 tons
Press #18  Hi Pro 100, straight side, air clutch, variable speed press with 4" stroke designed to run fully automatic

Equipped with:
a) PA Ind. Servomatic Servo feed
b) Pallet decoiler with 5,000# capacity
c) Weldotron P.L.S. with 16 limit switch circuits and 2 die protection circuits
d) Imco Tonnage monitor
e) LSP Ind. stock oiler

Shut Height: 15.0"
Ram Adjustment: 4.0"
Bed: 60.0" x 31.0"
Ram: 60.0" x 18.5"
Press Speed: 50-150 spm
T-slots in Ram and Bolster plate: 6" centers

BROWN BOGGS
100 tons
Press #19  Hi Pro 100, straight side, air clutch, variable speed press with 4" stroke design to run fully automatic

Equipped with:
a) PA Ind. Servomatic Servo feed
b) Coilmate Pallet decoiler with 5,000# capacity
c) Weldotron P.L.S. with 16 limit switch circuits and 2 die protection circuits
d) Imco Tonnage monitor
e) LSP Ind. stock oiler

Shut Height: 15.0"
Ram Adjustment: 4.0"
Bed: 60.0" x 31.0"
Ram: 60.0" x 31.0"
Press Speed: 50-150 spm
T-slots in Ram and Bolster plate: 6" centers

MINISTER
100 tons
Press #23  Air clutch variable speed with 4.0" stroke, Minister straight side P2-100-48 presses, designed to run fully automatic

Equipped with:
a) P.A. Servo Feed
b) Coe 1600# capacity reel
c) Nitrogen cylinder tanks
d) Unist stock oilers
e) Wintress die protection
f) Wintress programmable limit switched

Shut Height: 16.0"
Slide Adjustment: 4.0"
Bed Area: 48.0" x 31.0"
Press Speed: 60-200 spm

MINISTER
100 tons
Press #24  Air clutch variable speed with 4.0" stroke, Minister straight side P2-100-48 presses, designed to run fully automatic

Equipped with:
a) P.A. Servo Feed
b) Coe 1600# capacity reel
c) Nitrogen cylinder tanks
d) Unist stock oilers
e) Wintress die protection
f) Wintress programmable limit switched

Shut Height: 16.0"
Slide Adjustment: 4.0"
Bed Area: 48.0" x 31.0"
Press Speed: 60-200 spm

BROWN BOGGS
100 tons
Press #22  Hi Pro 100, straight side, air clutch, variable speed press with 4" stroke designed to run fully automatic

Equipped with:
a) PA Ind. Servomatic Servo feed
b) Pallet decoiler with 5,000# capacity
c) Weldotron P.L.S. with 16 limit switch circuits and 2 die protection circuits
d) Imco Tonnage monitor
e) LSP Ind. stock oiler

Shut Height: 15.0"
Ram Adjustment: 4.0"
Bed: 60.0" x 31.0"
Ram: 60.0" x 18.5"
Press Speed: 50-150 spm
T-slots in Ram and Bolster plate: 6" centers

WALSH PRESS
90 tons
Press #2  Air clutch, variable speed obi with 6.0" stroke designed to run fully automatic

Equipped with:
a) Clarktron Rimfire 3 press and die protection
b) Rapid air feed with 8.0" feed length
c) LSP Ind. pneumatic stock lubricating system
d) Coilmate Pallet decoiler, 2,500# capacity

Shut Height: 12.0"
Ram Adjustment: 3.0"
Bed Area: 47.0" x 27.0"
Press Speed: 25-78 spm
Ram Flange Hole Configuration: Exhibit "D" on attached chart

WALSH PRESS
90 tons
Press #12  Air clutch, variable speed obi with 6.0" stroke

Equipped with:
a) Rapid air feed with 8.0" feed length
b) Air cushion for draw work
c) Stamping specialty lubricating system
d) 1000# capacity stock reel

Shut Height: 14.0"
Ram Adjustment: 3.0"
Bed Area: 43.0" x 27.0"
Press Speed: 25-75 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
90 tons
Press #1  Air clutch, variable speed obi with 6.0" stroke designed to run fully automatic

Equipped with:
a) Clarktron Rimfire 3 press and die protection
b) Rapid air feed with 8.0" stroke
c) Stamping specialty lubricating system
d) Little 1000# capacity automatic stock reel
e) Air cushion for draw work

Shut Height: 14.0"
Ram Adjustment: 3.0"
Bed Area: 43.0" x 27.0"
Press Speed: 25-75 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
65 tons
Press #14  Air clutch, variable speed obi with 4.0" stroke designed to run fully automatic, and has air cushion for draw work

Equipped with:
a) Clarktron Rimfire 3 press and die protection
b) Rapid air feed with 8" feed length
c) Stamping specialty lubricating system
d) Little 1000# capacity automatic stock reel

Shut Height: 11.5"
Ram Adjustment: 3.0"
Bed Area: 37.0" x 18.5"
Press Speed: 50-100 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
65 tons
Press #11  Air clutch, variable speed obi with 3.5" stroke, press used primarily for secondary

Equipped with:
a) Clarktron Rimfire 3 press and die protection
b) Rapid air feed with 8.0" feed length
c) Stamping specialty lubricating system
d) Little 1000# capacity automatic stock reel
e) Air cushion for draw work

Shut Height: 11.5"
Ram Adjustment: 3.0"
Bed Area: 37.0" x 18.5"
Press Speed: 50-100 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
65 tons
Press #3  Air clutch, back geared, variable speed obi with 5.0" stroke, press used primarily for secondary and equipped with air cushion

Equipped with:
a) Press is inlined for easy part expulsion

Shut Height: 14.0"
Ram Adjustment: 3.0"
Bed Area: 37.0" x 18.5"
Press Speed: For secondary work only
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
65 tons
Press #13  Air clutch, variable speed obi with 4.0" stroke designed to run fully automatic

Equipped with:
a) Clarktron Rimfire 3 press and die protection
b) Rapid air feed with 8.0" feed length
c) Stamping specialty lubricating system
d) Little 1000# capacity automatic stock reel

Shut Height: 11.5"
Ram Adjustment: 3.0"
Bed Area: 37.0" x 18.5"
Press Speed: 50-100 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
45 tons
Press #21  Air clutch, variable speed obi with 3.0" stroke designed to run fully automatic and secondary

Equipped with:
a) Clarktron Rimfire 3 press and die protection
b) Rapid air feed with 6.0" feed length
c) Stamping specialty lubricating system
d) Little 1000# capacity automatic stock reel

Shut Height: 10.0"
Ram Adjustment: 2.5"
Bed Area: 27.0" x 14.0"
Press Speed: 90-180 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

WALSH PRESS
38 tons
Press #4  Mechanical clutch obi with 3.0" stroke equipped to run secondary and hand fed operations

Shut Height: 10.0"
Ram Adjustment: 2.5"
Bed Area: 32.0" x 14.0"
Press Speed: 75 spm
Ram Flange Hole Configuration: Exhibit "A" on attached chart

WALSH PRESS
38 tons
Press #7  Air clutch, variable speed obi with 3.0" stroke equipped to run secondary and semi-automatic operations

Equipped with:
a) Rapid air feed with 3.0" and 6.0" feed length
b) Clarktron Rimfire 3 press and die protection
c) Stamping specialty lubricating system
d) PA 1000# capacity stock reel

Shut Height: 10.0"
Ram Adjustment: 2.5"
Bed Area: 27.0" x 14.0"
Press Speed: 90-180 spm
Ram Flange Hole Configuration: Exhibit "B" on attached chart

BLISS PRESS
35 tons
Press #5  Mechanical clutch obi with 3.0" stroke equipped to run secondary and semi-automatic operations

Equipped with:
a) PA ind. air feed with 6.0" feed length
b) Stamping specialties lubricating system
c) Little 600# capacity reel

Shut Height: 10.0"
Ram Adjustment: 3.0"
Bed Area: 25.0" x 14.0"
Press Speed: 78 spm
Ram Flange Hole Configuration: Exhibit "A" on attached chart

WALSH PRESS
28 tons
Press #6  Air clutch, back geared, variable speed obi with 2.0" stroke designed for secondary and hand fed operations

Shut Height: 8.0"
Ram Adjustment: 2.0"
Bed Area: 12.0" x 22.0"
Press Speed: 80-150 spm
Ram Flange Hole Configuration: Exhibit "A" on attached chart

BROWN BOGGS
20 tons
Press #15  Air clutch obi with 2.5" stroke designed for secondary operations

Shut Height: 7.5"
Ram Adjustment: 4.0"
Bed Area: 20.0" x 11.0"
Press Speed: For single operation only
Ram Flange Hole Configuration: Exhibit "A" on attached chart

WALSH PRESS
18 tons
Press #10  Mechanical clutch obi with 2.0" stroke, press equipped to run secondary and semi-automatic operations

Equipped with:
a) Rapid air feed with 1.5" feed length

Shut Height: 6.5"
Ram Adjustment: 2.0"
Bed Area: 19.0" x 9.0"
Press Speed: For secondary operations only
Ram Flange Hole Configuration: Shank only

LOSHBURGH JORDAN
18 tons
Press #9  Mechanical clutch obi with 1.5" stroke, press equipped to run secondary and hand fed operations

Shut Height: 6.75"
Ram Adjustment: 4.0"
Bed Area: 18.0" x 10.0"
Press Speed: For secondary operations only
Ram Flange Hole Configuration: Shank only

DIAMOND MFG.
12 tons
Press #8  Mechanical clutch obi with 1.5" stroke, press equipped to run secondary and semi-automatic operations

Equipped with:
a) Rapid air feed with 1.5" feed length

Shut Height: 6.0"
Ram Adjustment: 4.0"
Bed Area: 17.0" x 10.0"
Press Speed: For secondary operations only
Ram Flange Hole Configuration: Shank only